|
FX & VFX INVERTERS
The OutBack FX Series is a sine wave inverter/charger
that can be used for both small and large power systems. Each
OutBack FX inverter/charger is a complete power conversion system -
DC to AC inverter, battery charger and AC transfer switch.
Additional FX inverter/chargers can be connected at any time in
either parallel (120 VAC), series (120/240 VAC), or three-phase
configurations. This allows a system to be tailored to meet the
specific power conversion requirements of the application, both at
the time of the installation and in the future.
Our unique sealed, gasketed die-cast aluminum chassis protects
and keeps the power conversion components cool - without requiring
outside air to be blown through the sensitive electronics. This
reduces the major causes of inverter failure - corrosion, dust,
insect and animal damage. The OutBack FX series inverter/charger
system is designed for both residential and commercial stand-alone
or back-up power applications with battery energy storage.
FX2024 24VDC, 2000VA 120VAC,
60Hz
$1795
FX2548 48VDC, 2500VA 120VAC,
60Hz
$2245
FX-----T Sealed version with optional TURBO cooling
fan add $100
New! Vented Inverter. VFX Series. More watts per dollar for
installations where well protected environments are available.
Powdercoated all aluminum die-cast chassis. Internal electronic
components are cooled by outside air. Stainless steele screen to
protect air intake and internal fan. All openings are 0.0025 inches
square to keep out dirt, bugs and other critters. Conformal coated
circuit boards to resist corrosion.
VFX2812 2.8 kWAC 12
VDC
$2345
VFX3524 3.5 kWAC 24
VDC $2345
VFX3648 3.6 kWAC 48
VDC
$2345
GTFX and GVFX Inverters. These inverters area capable of
sending power back into a utility grid when excess power is
available from the alternative energy power source. The same OutBack
grid-tie system also operates as a utility backup system, using
energy stored in a battery bank. Battery-less systems cannot provide
utility back-up and are not offered by OutBack Power Systems. Only
GTFX or GVTX models can be used in grid-tie mode.
GTFX2524 2.5 kW AC 24
VDC $1995
GTFX3048 3.0 kW AC 48
VDC $2345
GVFX3524 3.5 kW AC 24
VAC $2345
GVFX3648 3.6kW AC 48
VAC $2345
Prices subject to change without notice.
OutBack Power Systems
OutBack Power Systems offers all the components
to assemble a complete power panel; mounting plate, AC and DC
enclosures, AC and DC breakers, charge controller, programming unit,
and, of course, a selection of inverters. The power panel is
available in two sizes; the larger one accommodates up to four
OutBack Inverters or two Xantrex Inverters. The PS2, or short stack
as shown above, will accommodate one or two OutBack Inverters. The
Power Panels are available as separate components or pre-assembled.
Prices depend upon which components you choose. Let us help you
determine what will best suit your needs.
Xantrex Inverters
The SW Series is a sine wave (utility grade electricity)
DC to AC conversion inverter for use in stand-alone and backup
grid-tied power applications. It is fully compatible with grid
power, generators, and renewable energy systems. UL and CSA listed
and IEEE 929 compliant. 24 or 48 volt input, 4000 continuous watts
output is $2750. 48 volts input, 5500 continuous watts output is
$3450
The Grid-Tie Interface, an integrated assembly
that allows you to connect the SW to the utility grid.
Provides anti-islanding protection and reduces total harmonic
distortion. $449
The DR Series is a modified sine wave inverter with a
3-stage battery charger and an automatic AC transfer relay. This
controller is a robust, proven performer designed for remote, medium
sized, off-grid and utility backup in residential and commercial
applications. 1500 continuous watts output, 12 volt input is $1029.
2400 continuous watts output, 12 or 24 volts input is $1395. 3600
continuous watts output, 24 volts input is $1595
Xantrex Products
SMA America
Sunny Boy
The Sunny Boy line of inverters are applicable for 700 watts to
1 megawatt of PV grid tie power with a conversion efficiency of more
than 93%. The basic principle of the Sunny Boy inverters is that one
inverter is used per string of modules; where typicall
configurations use several strings of modules in parrallel to
achieve rated power, the Sunny Boy uses modules wired in series at a
high DC voltage. String inverters are also easily paralleled to
increase energy efficiency. The result is increased efficiency and
great savings in wire costs, eliminating the losses due to
mismatching and the need for a combiner box, blocking diodes, and
high current DC breakers or fuses. UL listed and CE certified. Five
year warranty.
SB 2500U 275-550 DC input
voltage 2500 watts continuous 240 AC
volts $2750
SB 1800U 150-400 DC
input voltage 1800 watts
continuous 120 AC
volts $2350
With LCD display,
add
$ 200
SB 2500U SBD 208 275-550 DC input
voltage 2100 watts continuous 208 AC volts
for connection to 3-phase utility
systems, with LCD
display $3050
prices subject to change without notice
Fronius IG Grid-Tie Inverters
The FRONIUS IG inverters offer high efficiency, prescision
MPP-traking, and active cooling, all of which result in superior
energy output from grid-tied photovoltaic systems. At 26 pounds,
These inverters are less than half the weight of cometing inverters.
High efficiency technology is compact and capable of transforming
considerable power. Using an innovative Phase-Shift process, The
Fronius IGminimizes switching losses. Fronius IG comes with standard
LCD for view and recording over 20 parameters pertaining to inverter
and system operation. Plug-n-Play cards provide a sophisticated data
collection system and weather station. Outdoor rated unit. Five year
warranty.
IG2000
150-450 DC input volts, 2000 watts, 240 volts AC
output, 1500-2500 Watts PV array, $2699
IG3000
150-450 DC input volts, 3000 watts, 240 volts AC output,
2000-3500 Watts PV array, $3249
IG2500LV
150-450 DC input volts, 2350 watts, 208 volts AC ouput,
1800-3000 Watts PV array,
$3029
| |
|
